The CA 306 series of high temperature accelerometers has been designed specifically for gas turbine applications.The accelerometers feature a rugged design with hermetically sealed connectors.An integral mineral insulated (MI) cable with stainless steel overbraid ensures signal integrity even in the most hostile environments.The differential output signal minimizes noise pick-up due to electrical ground potentials. A version with side connector is available when an integral cable is not required.
|
|
CA 306 |
|
|
144-306-000-321 |
|
|
|
|
|
|
|
|
17*17*4cm |
|
|
0.35kg |
Piezoelectric Accelerometer CA 306 GENERAL:
Signal transmission : 2 pole system insulated from casing, charge output
OPERATING (at 23 degree ± 5 degree )
Sensitivity (at 120 Hz) : 50 pC/g ± 5%
Dynamic measuring range (random) : 0.01 g to 100 g peak
Overload capacity (spikes) : Up to 200 g peak
Linearity : ±1% over dynamic measuring range
Transverse sensitivity : 15 kHz
Frequency response (typical) : ± 5% between 5 and 3 000 Hz (lower cut-off frequency is determined by electronics used)
Internal insulation resistance : Min. 109 Ω pole-ground Min. 109 Ω pole-pole
CA 306 Version 3XX:
| 144-306-000-311 | 3000 ± 100 |
| 144-306-000-321 | 6000 ± 150 |
| 144-306-000-331 | 9000 ± 200 |
| 144-306-000-341 | 12000 ± 200 |
CA 306
CA 306 Version 011:
Part Number (P/N) 144-306-000-011
CA 306 Version 1XX:
144-306-000-111 3000 ± 100
144-306-000-121 6000 ± 150
144-306-000-131 9000 ± 200
144-306-000-141 12000 ± 200
Vibrating sensor,Acceleration sensor, Eddy-current transducer,Monitor system module,Gateway communication module.